TDT RZ2 - Page 684

18-26 System 3
PM2Relay Power Multiplexer
ControllingthePM2RwithWordOut:
In this example a WordOut is used to control the PM2R (via an RP2.1) from within
RPvdsEx. This simplified format decreases cycle usage. An additional iScaleAdd is
required because the BitOut and WordOut components function differently and should
not be used in the same circuit. As before, a software trigger initiates the start of
the stimulus presentation. The triggered signal adds 64 to the output to change the
channel.
ControllingthePM2Rfromarun‐timeapplicat ion:
The examples described here could easily be modified to allow control from run-time
applications. Parameter tags can be included and used in other applications such as
BioSigRP or OpenEx.
C
hannel Sele
c
= 0
ConstI
K=0
[1:4,0]
D
evice Sele
c
= 0
iScaleAdd
SF=1
Shft=0
[1:5,0]
[1:1,0]
Src=Soft1
TTLDelay
Tdel=1
[1:9,0]
Schmitt
Thi=100
Tlo=10
[1:10,0]
Cos2Gate
Trf=10
Ctrl =Closed
[1:13,0]
Tone
Amp=1
Shft=0
Freq=1000
Phse=0
[1:12,0]
Rst=Run
c
O
[1:14,0]
Ch=1
ToneOut
iScaleAdd
SF=1
Shft=0
[1:6,0]
TTL2Int
Hi Val =64
[1:2,0]
ToneOut
W
[1:7,0]
M=-1
10110100