Teac CD-RW890 User Manual

12
Direct Playback Shuffle Playback
While in stop or playback mode, you can use the numeric buttons of
the remote control unit to select a track.
Playback starts from the selected track.
If the above operation is performed while paused, playback will be <
paused at the beginning of the selected track.
Direct playback is not possible during shuffle playback and <
programmed playback.
During playback, press the SHUFFLE button so that the tracks can be
played randomly.
In the stop mode, press the SHUFFLE button, then the Play (y)
button.
When the shuffle playback of all the tracks has been finished, the
unit stops and the shuffle playback mode is cancelled.
If you press the </ button during shuffle playback, next track will
be randomly selected and played. If you press the . button, the
currently played track will be played from the beginning. A track
cannot be replayed during shuffle playback.
Shuffle playback does not work during programmed playback and <
A-B repeat.
A-B repeat does not work during shuffle playback. <
Shuffle playback works with finalized discs only. <
If one of the following buttons is pressed, shuffle mode will be <
cancelled:
SHUFFLE (while in the stop mode), OPEN/CLOSE (L), POWER
When the SHUFFLE button is pressed during REPEAT 1 playback, all <
tracks are played in a random order.
track 7:
track 10:
CD-RW890EvAunlocked.pdf12 10/09/0817:17

Teac CD-RW890 Specifications

Power

operation voltage (US)	120V AC, 60Hz
operation voltage (EUR)	230V AC, 50Hz

Audio Interfaces

audio input	x 1
audio output	x 1
digital audio input	x 1 (Optical)

Weight and Dimensions

width	435 mm
height	100 mm
depth	295 mm
weight	4.5 kg