Need help?Do you have a question about the Teac CR-H500 and is the answer not in the manual?
General| Brand | Teac |
|---|---|
| Model | CR-H500 |
| Category | Stereo Receiver |
| Language | English |
Essential safety guidelines for operating the audio receiver to prevent hazards.
Guidelines on power cord handling, servicing, and environmental exposure to prevent electrical shock.
Instructions on checking voltage, ventilation, placement, and handling the power cord before operation.
Diagram and instructions for connecting speaker cables to the L and R terminals.
Detailed steps for connecting speaker wires, including positive/negative terminals and cable preparation.
Identification and labeling of all buttons, knobs, and indicators on the main unit's front panel.
Instructions for installing, replacing, and safely handling batteries for the remote control.
Procedure for powering the unit on and off using the STANDBY/ON switch.
How to switch between different input sources like TUNER, CD, iPod/USB, AUX, and PHONO.
Steps to turn on the unit, select CD source, and open/close the disc tray.
Procedure for placing discs in the tray and starting playback for Audio CDs and MP3/WMA discs.
Steps to connect a USB storage device and play MP3/WMA files.
Steps to connect an iPod via USB and automatic playback initiation.
Steps to connect USB, select source, and start recording to USB as MP3 files.
How to select TUNER mode and switch between FM and AM bands.
Explanation of Manual, Auto, and Preset tuning modes for finding stations.
Procedure for automatically scanning and storing up to 30 FM and 30 AM stations.
Steps to tune to a desired station and manually assign it to a preset number.
Step-by-step guide to manually set the current time using the remote control.
Instructions for setting the timer's start time, end time, and source selection.
How to schedule recording of radio or external sources to a USB device at a set time.
How to schedule playback of a source (like iPod or tuner) at a set time.
Solutions for common problems like no power, no sound, noisy sound, and remote control malfunction.
Troubleshooting steps for weak signals, monaural sound, and CD player playback problems.
Solutions for iPod not playing, no sound with MP3/WMA files, and character display issues.
How to manually initialize the unit's settings to their default factory state.
To Next Page
