Teac DR-H358i - Programmed Playback (MP3, WMA, DIVX)

35
Programmed Playback (MP3, WMA, DIVX)
1
If another source is selected, press the SOURCE button to
select “DISC Source” or “USB Source”.
or
< You can also select “DISC Source” or “USB Source” by using the
SOURCE button on the main unit.
2
Select a file using the Cursor buttons and press the
PROGRAM button.
The file is added to the programme list.
3
Press the MENU button once or twice to display the
programme list.
4
Highlight the first file in the programme list using the
Cursor buttons.
5
Press the Enter button or the Play/Pause button (
y
/
J
) to
start programmed playback.
or
< If you press one of the following buttons, the programmed
contents will be cleared.
SOURCE (AUX, iPod/USB, TUNER)
Open/Close (L) (in DISC mode), STANDBY/ON
MP3 WMA DIVX