Press the TAPE button or the FUNCTION button to select
"TAPE" .
1
Load a pre-recorded cassette tape.
2
Press the STOP/EJECT button to open the cassette holder,
load a cassette tape with its exposed side facing down, and
close the holder.
<
This unit can play normal (Type !) tape only.
<
You can use either TAPE ! or TAPE @ for playback.
Press the PLAY button to start playback.
3
To stop playback
A
Press the STOP/EJECT button to stop playback.
To suspend playback temporarily
(pause mode)
B
Press the PAUSE button. Playback stops at the current
position. To resume playback, press the PAUSE button
again.
Fast forward and rewind
C
Press the m or , button.
Press the STOP button to stop the fast forward or rewind
operation.
<
When the tape is wound up to the end, be sure to press the
STOP button to stop the unit.
To Next Page
Loading...
