Adjust the clock before setting the timer.
Press the DISPLAY button repeatedly until "TIMER ON"
indicator appears on the display.
1
Within 5 seconds, press the CLOCK ADJ button.
2
The "hour" value starts flashing.
<
When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
The "minutes" value starts flashing.
Hold up or down the knob to set the start time(minutes), and
press the CLOCK ADJ button.
4
Press the DISPLAY button.
"TIMER OFF" indicator appears on the display.
5
Within 5 seconds, press the CLOCK ADJ button.
6
The "hour" value starts flashing.
Hold up or down the knob to set the start time(hour), and
press the CLOCK ADJ button.
3
To Next Page
Loading...
