Preparation
The TV base will be separated with the TV unit. You should install the base before you use the TV unit.
1.Place the TV with its front side facing down on a cushioned flat surface.
Stand Installation
2.Place the base on the hinge of TV unit, with the base direction shown under the base.(See the picture)
3.Tighten the supplied 4X20 screws to fix the TV stand securely in place.(6 Screws: Provided with TV unit)
personal injury.
■The TV stand may not be securely fixed in place after
repeated tightening and loosening of the screws. ■ After installing the TV stand, please ensure that the
screws are tightened firmly. Failure to do so may
■ While assembling and disassembling the TV stand,
cause the TV set to tip over or become damaged.
please use your hand to support it. Failing to do so
may cause the TV stand to fall and result in
WARNING
4
To Next Page
Loading...
