32
Programmed Playback (MP3, WMA)
1
If another source is selected, press the DVD or USB button
to select “DISC Source” or “USB Source”.
or
< You can also select “DISC Source” or “USB Source” by using the
FUNCTION button on the main unit.
2
Select a file using the Cursor buttons, then press the
PROGRAM button.
The file is added to the programme list.
3
Press the MENU button once or twice to display the
programme list.
4
Highlight the first file in the programme list using the
Cursor buttons.
5
Press the ENTER button to start programmed playback.
< If you press one of the following buttons, the programmed
contents will be cleared.
FUNCTION (AUX, USB, FM)
OPEN/CLOSE (L) (in DISC mode), STANDBY/ON
MP3
WMA
To Next Page
Loading...
