Teac MC-DV600 - Wake up Timer

42
The unit can be programed to turn on at a specified time.
< Adjust the clock before setting the timer (page 19).
1
If the unit is on, press the STANDBY/ON button to turn it
off (standby).
2
Press the TIMER button.
< Press the TIMER button twice if the unit is in ECO Power
Standby mode (page 20).
“TIMER SET” appears on the display, and the “hour” value starts
blinking.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
3
Press the Volume (+ or –) button to set the start time
(hour), and then press the TIMER button.
The “minutes” value starts blinking.
4
Press the Volume (+ or –) button to set the start time
(minute), and then press the TIMER button.
“OFF” starts blinking.
5
Press the Volume (+ or –) button to turn On or Off the
timer function, and then press the TIMER button.
Select “ON” to turn the timer function on.
The TIMER indicator (
) appears on the display.
When you do not use the timer, select “OFF”. (The TIMER
indicator disappears from the display.)
Wake Up Timer