Need help?Do you have a question about the Teac RA-40S and is the answer not in the manual?
Describes connection points for the tape player unit.
Describes connection points for the record amplifier unit.
Identifies and explains controls on the tape player unit.
Steps for playing a recorded tape using the A-4000S player.
Steps for playing a recorded tape using the A-4010S deck.
Steps for playing monophonic tapes with the A-4000S player.
Steps for playing monophonic tapes with the A-4010S deck.
Details on recording stereo audio using microphones or line inputs.
Instructions for mixing microphone and line input signals for recording.
How to record audio using a microphone.
How to record audio from external sources via line input.
How to mix microphone and line inputs for recording.
Method for selectively erasing parts of a tape.
Instructions for cleaning tape heads and other components.
Procedure for demagnetizing tape heads to maintain performance.
Guidelines for lubricating moving parts of the equipment.
Describes connection points for the tape player unit.
Describes connection points for the record amplifier unit.
Identifies and explains controls on the tape player unit.
Steps for playing a recorded tape using the A-4000S player.
Steps for playing a recorded tape using the A-4010S deck.
Steps for playing monophonic tapes with the A-4000S player.
Steps for playing monophonic tapes with the A-4010S deck.
Details on recording stereo audio using microphones or line inputs.
Instructions for mixing microphone and line input signals for recording.
How to record audio using a microphone.
How to record audio from external sources via line input.
How to mix microphone and line inputs for recording.
Method for selectively erasing parts of a tape.
Instructions for cleaning tape heads and other components.
Procedure for demagnetizing tape heads to maintain performance.
Guidelines for lubricating moving parts of the equipment.
To Next Page
General
