Teac TTDEDS2018D - Bluetooth Device Management; Bluetooth Connection Notes; Disconnecting and Reconnecting; Maintenance and Care

Note:
1. In some circumstances the Bluetooth connecon may break or disconnect due to signal
interference, moving beyond the maximum connecon distance, or having an object
move between both Bluetooth devices. However, your device will usually reconnect again
automacally. In some cases, the devices may need to be manually reconnected using the
Bluetooth device’s sengs.
2. If you cannot connect your Bluetooth device, the Bluetooth driver may need to be updated
to the latest version.
DISCONNECTED FROM PAIRED DEVICE
1. To disconnect with a paired device, Turn OFF the system directly.
2. You can also disconnect from the Bluetooth device manually - turn OFF the Bluetooth
funcon from the paired device to disconnect from the turntable.
CONNECT TO NEW BLUETOOTH DEVICE
Turn o the Bluetooth funcon from the previous Bluetooth device. If the system is
disconnected from the paired device, the system will generate a beep sound every few seconds
as a prompt for acon.
Follow the previous pairing steps to connect to a new Bluetooth device of choice.
MAINTENANCE
REPLACING THE STYLUS
-Refer to the gures 1-8