Need help?Do you have a question about the Teac UD-505 and is the answer not in the manual?
General| Headphone Impedance Support | 16 - 600 Ohms |
|---|---|
| Type | USB DAC/Headphone Amplifier |
| Inputs | USB, Optical, Coaxial |
| Outputs | RCA, XLR |
| PCM Support | Up to 32-bit/768kHz |
| DSD Support | 22.4MHz |
| Total Harmonic Distortion | 0.0015% (RCA) |
| Power Supply | AC 100V - 240V, 50/60Hz |
| DAC Chip | AKM AK4497 (dual mono configuration) |
Details essential safety warnings and instructions to prevent hazards like electric shock and fire.
Guidelines for safe handling, installation, and disposal of batteries to prevent leaks, fire, or injury.
Connect stereo analog audio sources like cassette decks or CD players using RCA cables.
Connects digital audio output from devices using a commercially available RCA coaxial digital cable.
Connects digital audio output from devices using a commercially available optical digital cable with a square connector.
Outputs analog audio via XLR or RCA connectors to a stereo amplifier or powered speakers.
Connects to a computer's USB port for digital audio input, requiring a USB2.0 cable.
Explains how to connect optical and coaxial digital audio cables to the front panel input.
Connect standard 6.3mm stereo headphones and set the headphone output to UNBALANCED.
Connect balanced headphones via 6.3mm or 4.4mm jacks and set the headphone output accordingly.
Guides on turning the unit on and selecting the desired input source using the power switch and input knob.
Explains how to adjust volume for line outputs and headphones using the VOLUME knob.
Details selection between RCA and XLR connectors for analog audio output.
Sets headphone output modes for UNBALANCED, BALANCED, or ACTIVE GROUND connections.
Sets headphone output modes for BALANCED or ACTIVE GROUND connections.
Provides instructions and attention notes for installing the dedicated driver before USB connection.
Addresses issues like the unit not turning on, no sound output, humming, and headphone sound problems.
Resolves issues where the computer does not recognize the unit, causes noise, or fails to play audio files.
Helps resolve problems with showing device names or changing connected Bluetooth devices.
To Next Page
