Specifications
Analog audio output
Jacks ...............XLR jacks (2 channel) x 1
RCA jacks (2 channel) x 1
Output impedance ..............XLR: 100 Ω
RCA: 47 Ω
Maximum output level (1 kHz, full scale,
10 kΩ)
XLR (Gain: 0 dB): 2.0 Vrms
RCA: 2.0 Vrms
Frequency response . . 5 Hz to 55 kHz (–3 dB)
Sampling frequency: 192 kHz
Signal-to-noise ratio (S/N) . . . . . . . . . . . .115 dB
Total harmonic distortion ....0.0015% (1 kHz)
Sampling frequency: 192 kHz
Digital audio input
RCA terminal x 1 (input impedance 75 Ω)
0.5 Vp-p
Optical digital terminal x 1
–24.0 to –14.5 dBm peak
USB port – B connector ..............USB 2.0
Data sampling frequency
32*/44.1/48/88.2/96/176.4/192 kHz
* If the sampling frequency of the input
signal is 32 kHz, the frequency indicators
do not light up, but the input indicators
do.
Data bit length ...................16/24 bits
General
Power supply
Europe model ............230V AC, 50 Hz
U.S.A./Canada model .....120V AC, 60 Hz
Power consumption ...................13 W
External dimensions (W x H x D)
215 x 61 x 231 mm
(including protrusions)
Weight ...............................1.5 kg
Operating temperature ......+5 °C to +35 °C
Operating humidity
5 % to 85 % (no condensation)
Storage temperature . . . . . . . –20 °C to +55 °C
Accessories
Power cord x 1
RCA audio cable x 1
Owner’s manual (this document) x 1
Warranty card x 1
<
Design and specifications are subject to change
without notice.
<
Illustrations may differ slightly from production
models.
The nameplate is located on the bottom of the
unit as shown below.
To Next Page
Loading...
