Teac W-4200 - Page 7

Recording with REC/PLAY Il
Do
not
leave
the
PLAY
|
deck
in
the
playback
mode.
i Press the POWER switch to on.
POWER
Cc
Load
a
recordable
cassette.
Set
both
TAPE
SELECTOR
switches
to
the
appropriate
positions
according
to
the
type
of
tape
loaded.
TAPE .OMETAL/CrO2
SELECTOR SLNoRMAL
Dcroz
EI Set the DOLBY NR switch as required.
W-410
W-420C
DOLBY NR DOLBY NR
= F M8 oc = =
fl Set the BIAS FINE (W-420C only) to the center
click position.
BIAS FINE
Hi Press the pause button and then press the
record button. (The RECORD LED indicator
comes on.) This enables you to adjust the
recording level without actually recording.
(Operate in the order shown.)
aoaid
2 1 Lights
Adjust the REC LEVEL control so that the loudest
sound to be recorded makes the meter indication
just reach the 0 dB point. For more details, see
"Setting the Recording Level" section on page 8.
PEAK PROGRAM LEVEL METER
oS +38
=HI- SPEED DUB =RECORD
REC LEVEL
4 6
i Press the pause button again to start recording.
a