Teac W-470 - 5-2 Playback Performance Checks

5-2 PLAYBACK PERFORMANCE
‘TEAC test tapes:
MIT-150C: For Doiby level calibration
MIT-256: For playback frequency
response check for NORMAL
Deck settings: MIT-356: For METAL and Cr02
DOLBY NR sw: OUT MIT-5511: For S/N check with NORMAL
ADJUST MEASURING
INPUT SIGNAL | (or CHECK) POINT: RESULT
MIT-150C CHECK OUTPUT: ; Refer to
Phase: within 45° | Fig. 5-3
Connection: Fig. 5-1
2. Specified
{ output level
-3cB £ 1 B
Connection: Fig. 5-1 | MIT-150C (489 to 615 nV)
OUIPUT:Fig. 5-7
OUIPUT:Fig. 5-7
output level
-3 B
to noise
noise
ratio S/N