Need help?Do you have a question about the Team Orion VortexR8X Pro and is the answer not in the manual?
General| Brand | Team Orion |
|---|---|
| Model | VortexR8X Pro |
| Category | Controller |
| Language | English |
How to connect and reverse motor wires for sensorless motors.
Connecting sensored motors via sensor wire, respecting wire order.
Step-by-step guide to calibrate ESC with transmitter inputs.
Steps to enter programming mode or reset to factory defaults.
Guide on changing ESC parameters using the setup button.
Detailed instructions for modifying parameters via the ESC's setup button.
Explains the three running modes: Forward Only, Forward/Reverse, and Rock Crawler.
Sets automatic brake force when throttle returns to neutral.
Prevents battery over-discharge by monitoring voltage.
Adjusts initial throttle punch for acceleration.
Sets the maximum braking force.
Adjusts maximum power when traveling in reverse.
Sets the minimum braking power when brakes engage.
Adjusts throttle sensitivity around the neutral point.
Adjusts motor drive current timing for performance and efficiency.
Allows changing the motor rotation direction.
Manually select battery voltage overriding automatic detection.
Sets the voltage output of the ESC BEC system for electronics.
To Next Page
