Team Orion Vortex R8.1 pro User Manual

INSTRUCTION MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG

Team Orion Vortex R8.1 pro Specifications

General

Brand	Team Orion
Model	Vortex R8.1 pro
Category	Controller
Language	English

Summary

Warnings

Limited Warranty

Disposal Instructions

Connections

Motor Connection

Details on connecting sensorless and sensored brushless motors.

Battery Connection

ESC Power Switch

ESC Calibration

Programming Your ESC

Enter Programming Mode / Factory Reset

How to enter programming mode or reset ESC to factory defaults.

Select Parameter to Modify

Steps to select a parameter for adjustment.

Modify and Save Parameter Setting

How to change and save parameter settings.

Features

Status LED Function

Audio Warning Tones

ESC Parameters Setup

Modify Parameters via Setup Button

Detailed steps for adjusting ESC settings using the built-in button.

Adjustable Parameters

Running Mode

Configures forward/reverse functionality and motor modes.

Drag Brake Force

Adjusts the automatic braking force when throttle returns to neutral.

Low Voltage Cut-Off

Prevents battery over-discharge by reducing/shutting off power.

Start Mode (Punch)

Sets the initial acceleration force for the car.

Max Brake Force

Defines the maximum braking power applied.

Max Reverse Force

Sets the maximum power for reverse travel.

Initial Brake Force

Sets the minimum braking power when brakes engage.

Neutral Range

Adjusts throttle sensitivity around the neutral point.

Timing

Configures motor drive current timing affecting performance and efficiency.

Motor Rotation Direction

Sets the motor's rotation direction (CW/CCW).

LiPO Cells

Specifies the number of LiPo cells for voltage-based protection.

BEC Voltage

Sets the voltage output for the ESC's BEC system.

Restore Default Settings

Program Box

PC Software

Setting Profiles