Need help?Do you have a question about the Team Orion Vortex R10 One and is the answer not in the manual?
General| Brand | Team Orion |
|---|---|
| Model | Vortex R10 One |
| Category | Controller |
| Language | English |
Details the first step of ESC calibration using ON/OFF and SET buttons.
Instructions to enter programming mode or reset ESC settings.
Steps to select and modify ESC parameters using the SET button.
Procedure to save changes and exit the ESC programming mode.
Recommended settings for NiMH batteries to prevent premature ESC cutoff.
Important safety precautions and handling guidelines for the ESC.
Details the product warranty terms and conditions, including limitations.
Describes how to connect the ESC to the motor and receiver.
Step-by-step instructions for calibrating the ESC to the transmitter inputs.
Explains audio beeps and LED flashes for error conditions.
Procedure for adjusting ESC parameters using the SET button and LED feedback.
Describes the forward-only/forward-reverse modes with brake options.
Sets the amount of automatic brake applied when returning throttle to neutral.
Prevents battery over-discharge by monitoring voltage and shutting off power.
Sets the initial throttle punch for acceleration, from soft to strong.
Adjusts the maximum braking force, affecting control and ESC load.
Resets all ESC parameters to factory default values.
To Next Page
