14 Copyright Team Orion © 2014
4. Start mode “punch”
This parameter sets the initial throttle punch when the car
accelerates. Level 1 gives a very soft initial acceleration and
level 9 gives a very strong initial acceleration. Warning!
Stronger acceleration will also result in higher ESC and
motor running temperature. Check the motor and ESC
temperature and adjust the parameter to keep temperature
within safe limits.
› Setting value from 1 to 9 (default 5)
5. Max Brake Force
This parameter adjusts the maximum breaking force. A
higher value provides stronger braking, but it also causes
extra stress to the ESC and motor. Warning! Stronger
brakes will also result in higher ESC and motor running
temperature. Check the motor and ESC temperature and
adjust the parameter to keep temperature within safe limits.
› Setting value from disabled to 100% (default 50%)
6. Max Reverse Force
This parameter adjusts the maximum power when travelling
in reverse.
› Setting value from 25% to 100% (default 25%)
7. Initial Brake Force (minimum brake)
This parameter adjusts the minimum amount of braking
power when the brakes engage. A higher value will give
stronger brakes but can also cause loss of control and extra
stress on the motor/ESC.
› Setting value from drag brake value to 40% (default
drag brake)
To Next Page
Loading...
