www.teamorion.com 5
Sensorless brushless motors
When using a motor without sensors, if the motor spins in
the wrong direction, simply reverse two of the motor wires.
Sensor brushless motors
When using a motor equipped with sensors, the motor
should also be connected to the ESC via a sensor wire.
WARNING! When using sensor equipped motors, you must
respect the A-B-C wire connection order, you can’t connect
the wires randomly or the motor will not spin at all!
CONNECTIONS
Motor
Servo
Receiver
Vortex R8X
Switch
+ (red)
SET
ST/CH1
TH/CH2
On/O
- (black)
Battery
To Next Page
Loading...
