Teba therm TP-13 - Menu Functions; Combustion Functions Menu; Level; Auger Calibration

13
5.2. MENU FUNCTIONS
Touch the P3 button to enter the user menu. The following menus will appear on
the screen.
Combustion Management
Heating Management
Remote control
Chrono
Loading
Press P3 for 3 seconds to enter the input menu, the following menu will appear on the
screen.
Input settings
Home menu
System menu
Use the P4 and P6 buttons to switch between menus. Use the P3 button
to access the desired menu.
5.2.1 COMBUSTION FUNCTIONS MENU
Touch the P3 button to enter the submenu. You can enter the Combustion
Management menu again with the P3 button. In the Combustion Management menu, there
are Level, Auger Calibration and Fan Calibration menus.
Level;
In this menu, the pellet combustion speed can be changed with the help of P4 and P6
buttons. Ex: 1 - 2 - 3 - 4 - 5 – 6 - A (A = Auto) Use P3 to save.
Auger Calibration;
Enter the pellet loading speed settings with P3. Use P4 and P6 to slow the pellet
loading speed or adjust the acceleration values in the display ( +7…0…-7 ). Use P3 to
save. Use P1 ESC to exit the menu.
Fan Calibration;
Enter with the P3 button for fan speed control. Use P4 and P6 to slow down the chimney
fan speed or set acceleration values in the display ( +7…0…-7 ). Use P3 to save. Use P1 ESC
to exit the menu.
5.2.2. HEATING MANAGEMENT
Press the P3 button to enter the submenu. You can enter the Heating Management
menu again with the P3 button. Boiler thermostat, heating power and summer-winter
menus are avaliable in the Heating Management menu.