5.2.5. LOADING MENU
Press the P3 button to enter the submenu. It will manually load the pellet when it
is turned ON with the P4 button. Pellet loading will stop by selecting OFF mode.
Use P1 ESC to exit. (This is only a process to fill the pot and accelerate the ignition
during the first burning phase when the product is in the OFF mode.
5.2.6. TIME AND DATE MENU
Press the P3 button to enter the submenu. The time setting menu appears first.
Press the P3 button again to set the current time. The numbers will flash and use
P4 and P6 to change the digits. After setting, press the P3 button. Use
the P4 button to move to the minute setting side. Login with the P3 button
for the current minute setting. The numbers will flash. Use P4 and P6 to
change numbers. After setting, save it with P3. After the time setting is completed,
P4 button changes to day / month / year. Press P3 to enter. The display will
flash. Use P4 and P6 to change numbers. Press P3 to set the time
according to the order in the setup menu. Use P1 ESC to exit.
5.2.7. LANGUAGE MENU
Press the P3 button to enter the submenu. The P4 and P6 buttons are the
preferred language. Sample; Turkish P3 button to save. Use P1 ESC to exit.
5.2.8. ENTRANCE MENU
Press the P3 button to enter the submenu. The following screen will appear
5.2.9. SYSTEM (PARAMETERS) MENU
FOR AUTHORIZED SERVICE.
OUR COMPANY IS NOT RESPONSIBLE FOR ANY DAMAGES İN CASE USER ENTERS IN
SYSTEM MENU AND CHANGE THE PARAMETERS
To Next Page
Loading...