What to do if my TEC Scales power does not come on?
If your TEC Scales' power does not come on, ensure the power cord is properly plugged into an AC socket. Also, check the circuit breakers or fuses. You can also plug another appliance into the same AC socket to verify if there is a power supply.
Why is the printing unclear on my TEC SL-9000-ESB-X Scales?
If the printing from your TEC Scales is unclear or blurred, the print head may be dirty, so try cleaning it. Another reason may be poor media quality; if so, try changing the media type.
How to fix a raised nap after cutting media in TEC SL-9000-ESB-X Scales?
If you see a raised nap where the media has been cut on your TEC Scales, try cleaning the cutter blades.
What to do if there are dots missing in the print on TEC SL-9000-ESB-X?
If you are experiencing missing dots in the print from your TEC Scales, the print head might be dirty. Try cleaning it.
Why is the display unstable on my TEC Scales?
If your TEC Scales displays unstable readings, ensure there isn't anything affecting the stability. Also, avoid locations subject to wind.
What to do if TEC SL-9000-ESB-X does not print?
If your TEC Scales does not print, check that the media is loaded correctly. Also, check whether the print head is set correctly.
What to do if TEC Scales displays '----' at power on?
If “----” is displayed on your TEC Scales at power on, make sure nothing is on the platter and turn the power on again. Also, ensure the platter is mounted correctly before turning the power on again.
Explains the meaning of various warning, prohibition, and instruction symbols used in the manual.
Lists general safety guidelines and precautions for operating and maintaining the equipment.
Provides step-by-step instructions for installing the remote display unit on the scale.
Guide on how to enter and navigate the scale's programming menu.
Explains the process of selecting specific menus and items within the programming interface.
Instructions on how to input text for commodity names, addresses, and messages.
Detailed steps for setting or changing PLU data, including PLU#, UPC#, and commodity names.
How to set passwords and protect various menu functions from unauthorized access.
Step-by-step guide for performing standard weighing operations and issuing labels.
Procedure for operating the scale in fixed price mode, common in the US.
How to operate the scale for items sold by count rather than weight.
Explains how to use tare functions and save weighing data.
Lists error messages encountered during programming and their solutions.
Describes errors related to label printing and their resolutions.
Checklist of basic checks to perform before contacting technical support.
To Next Page
General
