34
www.techfrost.com
ENGLISH
4.1 Information for a correct waste
Directive on the electrical appliances waste (WEEE) (RoHS)
In the optical of the respect of the ambient of the health and based on the sanctioned despositions
from the Directive 2002/95/CE of the European Union in matter of limitation to the use of dangerous
substances (RoHS), regarding:
• Lead (Pb)
• Mercury (Hg)
• Hexavalent chromium (Cr Vl)
• Cadmium (Cd)
• Polybrominated biphenyl (PBB)
• Polybrominated diphenyl ether (PBDE)
le it and divide the various components into groups according to their chemical properties. Remem-
ber that there is oil and refrigerating solutions in the condenser that can be recuperated and reused
and the various components are considered special waste products and as such are treated as urban
waste.
CAUTION: All dismantling operations must be carried out by specialised personnel!
The following symbol on the side of the equipment indicates that the product
must not be disposed of as urban waste.
Disposing of a household appliance separately avoids possible negative conse-
quences for the environment and healt deriving from inappropriate disposal and
enables the constituent materials to be recovered to obtain signicant savings in
energy and resources. As a reminder of the need to dispose of household applian-
ces separately, the products is marked with a crossed-out wheeled dustbin.
and according to of art. the 13, D.Lgs. 25 July 2005, n. 151 “Performance of the Directives 2002/95/
CE, 2002/96/CE and 2003/108/CE, relative to the reduction of the use of dangerous substances in the
equipment electronic electrical workers and, to the waste disposition, TECHFROST declares that its
products respect such norms.
5 INSTRUCTION FOR THE INSTALLATION
This manual aims at providing the user with all the necessary information to correctly use and main-
tain the Chiller.
Before use carefully read all the instructions given in this manual.
The manufacturer shall decline all responsibility for operations and use which disregard the in-
structions herein.
5.1 Materials and chilling solutions
Le zone a contatto con il prodotto sono realizzate in acciaio inox.
Nei gruppi refrigerati viene impiegato uido refrigerante consentito dalle attuali legislazioni, del tipo
HFC. Il tipo e la qualità di gas utilizzato sono indicati sulla targhetta.
5.2 Elementary safety standards – risks
The Chiller has no dangerous corners, sharp and cutting surfaces or protruding parts. All safety
To Next Page
Loading...