46
www.techfrost.com
ENGLISH
Time blast chilling/blast freezing LED.
If it’s on:
-a time blast chilling and conservation cycle or a time blast freezing cycle
is running
-a time blast chilling cycle or a time blast freezing cycle is running
If it’s ashing:
-day and time setting is running
Conservation LED
If it’s on:
-a conservation cycle is running
Defrosting LED.
If it’s on:
-a defrosting cycle is running
Pre-cooling LED.
If it’s on:
-a pre-cooling cycle is running and the cell temperature reaches the tempe-
rature set by the parameter r12.
If it’s ashing:
-a pre-cooling cycle is running and the cell temperature doesn’t reach the
temperature set by the parameter r12
HACCP
HACCP LED.
If it’s on:
-all the informations about the HACCP alarm won’t be shown
If it’s ashing:
-the device will memorize at least one new HACCP alarm
°C
Celsius Degree LED.
If it’s on:
-the temperature unit of measurement will be Celsius Degree
°F
Fahrenheit Degree LED.
If it’s on:
-the temperature unit of measurement will be Fahrenheit Degree
min
Minutes LED
If it’s on:
-the time unit of measurement will be minute.
On/Stand by LED.
If it’s on:
-the device will be in the state “stand-by”
To Next Page
Loading...