Take foggy videos.
Check whether the camera lens is dirt or finger prints are on it. Use
glasses cleaning cloth to wipe the lens.
In cloudy circumstances the color is not perfect.
Please check the menu "white balance" option is set to automatic.
Horizontal stripes / Interference image.
This is due to the error of the "light source frequency", please according to
the local power supply frequency, set to "50Hz" or "60Hz". For Europe set to
50Hz. (For USA set to 60Hz.)
When the device crashes.
Press the reset button on the back of the device with a thin object (eg
paperclip). After a short recovery TX-124 restarts.
General information
Never place the device on an unstable surface. Dropping may damage the
device.
The device is not in the hands of children. It is not a toy.
Also observe the safety instructions and the operating instructions of the
other devices to which the device is connected.
In commercial facilities, the accident prevention regulations of the
Association of Professional Associations for Electrical Installations and
Equipment must be observed.
The seller assumes no responsibility for damage that occurs during the use
of the device, as well as for complaints by third parties.
Environmental conditions
Avoid heavy mechanical stress on the device. Protect it from vibration, hard
knocks, do not drop it or shake it.
Do not expose the device to high temperatures (over 50°C) and strong
temperature fluctuations. Protect it from direct solar radiation and proximity to
radiators.
IP68 camera protection class (dustproof & protection against temporary
immersion). The monitor only be operated indoors.
It cannot be completely ruled out that some paints, plastics or other care
products attack the material of the housing or accessories.
To Previous Page
Loading...
