5
2. Turn on the Binocular
Press and hold the Power button (5) until the display shows:
Welcome, the binoculars are ready to take photos or videos.
Important: Setting language and time! After turning on the
binocular for the first time you should change the language (default
is English) and time. You need to open the system settings by
pressing the menu button (2) two times. Now use the Down button
(10) to navigate to “Language”/”Date&Time” and press OK button
(11). Again, use the Up (9) and Down (10) button to navigate
through the languages/ set Date&Time. Confirm by pressing the OK
button (11). Exit by pressing the menu button (2) once or twice until
you return to the normal screen.
3. Select the mode
When the blue LED of the binocular is lit, press the Mode button (3)
to switch between: Video; Photo; Replay
- In video mode: Press the OK button (11) to start shooting. Press
again to stop filming.
- In photo mode: Press the OK button (11) to take a picture.
Press as many times as you want to take a photo.
- In replay mode use the UP (9) and Down (10) buttons to select
the file you want to watch and press the OK button (11) to play a
video on the screen.
Note: For best picture quality, hold the binoculars firmly or use a
tripod to stabilize during recording.
4. Turn off the Binocular
Press and hold the Power button (5) until the display shows: Good
Bye.
To Next Page
Loading...
Need help?
General
