32.Group 1 Microphone / Line Selectors:Use these selectors to select corresponding input level of microphones
/ Lines 1, 2, 3 & 4.
33.XLR Microphone Inputs (Balanced): Connect balanced microphone to these inputs.
34.Group 2 Microphone / Line Selectors:Use these selectors to select corresponding input level of microphones
/ Lines 5, 6, 7 & 8.
35. Group 2 Microphone / Line Inputs:
Microphone /Line inputs
¼"
.
36.Group 2 Microphone
/ Line
Treble Control: Use this knob to adjust the treble of the Group 2 (microphones /
Lines 5, 6, 7 & 8) signal output.
37.Group 2 Microphone /Line Mid Control: Use this knob to adjust the mid level frequencies of the Group 2
(microphones / Lines 5, 6, 7 & 8) signal output.
38.Group 2 Microphone / Line Bass Control: Use this knob to adjust the bass of Group 2 (microphones / Lines 5,
6, 7 & 8) signal output.
39.Group 2 Microphone / Line Volume Controls: Use these knobs to adjust corresponding volume of microphones
/ Lines 5, 6, 7 & 8.
40.Group 2 Microphone / Line Echo Control: Use this knob to adjust the echo of Group 2 (microphones / Lines 5,
6, 7 & 8) signal output.
41.Bluetooth Indicator: This Bluetooth indicator will remain illuminated when there is a Bluetooth device connected
to the MM3000. It will turn off if there is no Bluetooth connection.
42.MIC Priority Indicator: This indicator will remain illuminated when the MIC priority function is enabled. It will be
silient off if the MIC priority function is disabled.
MM3000
5
To Next Page
Loading...
Need help?
General
