32
4
THE MEDIAACCESS
GATEWAY
WI
RELESS
AC
CESS
PO
INT
DMS3-CTC-25-114 v1.0
4.1 How to configure the wireless settings
1 Browse to the Admin Tool (http://192.168.0.1).
For more information, see “Accessing the Admin Tool” on page 25.
2 On the Gateway menu, click Connection and then click WiFi.
3 The WiFi page appears. In the Private WiFi Network table, click the Edit button next to the access point that you want to
modify.
4 The Edit page appears:
The following fields are available for configuration:
Wireless Network:
Allows you to enable or disable this access point.
Network Name (SSID):
To distinguish one wireless network from another, each wireless network has its own network name, often referred to as
Service Set IDentifier (SSID). All your wireless clients on your network must use this network name (SSID).
Mode:
The standards that are allowed for wireless communication. Only devices that support one of the selected modes can
connect to the MediaAccess Gateway.
Security Mode:
The encryption type used to secure your wireless communication. We recommend using WPAWPA2-PSK (TKIP/AES)
as it is compatible with most of the Wi-Fi devices and offers an excellent level of security. Open and WEP are to be
avoided because of their own security flaws and should not be used in normal conditions.
Channel Selection:
When you select Automatic, the MediaAccess Gateway automatically selects the best channel for your wireless
communication.
Channel:
The channel that is currently used for your wireless communication.
Network Password:
The wireless network key that is used for encrypting your wireless communication.
Show Network Password:
When you select the Show Network Password check box, the text in the Network Password will no longer be masked.
To Next Page
Loading...
Need help?
General
