Technicolor MediaAccess TG799vn - Common Telephony Services

61
6 TELEPHONY
DMS-CTC-20110713-0016 v2.0
6.3.2 Common Telephony Services
Introduction
This section provides an overview of the functions that will be available if you activate one of the following services:
 Call Hold service
 Call Waiting service
 Conference Call (3 Party) service
 Call Transfer
For more information on the other services, please contact your service provider.
Call Hold service
If the Call Hold service is activated, you can use the following functions:
To . . . Press... Illustration
Put an active call on hold and enable a call set up (the
dial tone is generated)
R, 2
Terminate the call on hold R, 0
Terminate an active call and switch to the call on hold R, 1
Retrieve the call on hold (when there is no active call) R, 1
Terminate an active call and enables a call set up (the
dial tone is generated)
R, 9
BA
You
on hold
dial tone
BA
You
active
You press
R, 2
BA
You
active
BA
You
active
on hold
You press
R, 0
BA
You
active
BA
You
active
on hold
You press
R, 1
BA
You
active
BA
You
on hold
You press
R, 1
BA
You
dial tone
on hold
BA
You
active
on hold
You press
R, 9