Technics QUARTZ ST-Z400L

5 iy 4 Tele) &
mw HOW TO PRESET RADIO BROADCAST FREQUENCIES
This unit can be used to preset as many as 16 radio broadcast e Memory presetting
frequencies: 8 FM and 8 AM (MW/LW). After broadcast
frequencies have been preset as described below, any desired
station can be quickly and easily selected by simply touching
one button.
Automatic memory presetting
Beginning at the frequency indicated by the digital display, the FM broadcasting stations, MW broadcasting stations, and LW broadcasting
stations will be automatically preset in “channels” 1 through 8 for FM, 1 through 4 forMW,and 5 through 8 for LW, respectively, in order
upward from the broadcasting station of the lowest frequency. Note that in mountainous or remote areas, broadcasting stations
which have weak broadcasting signals cannot be automatically preset into the memory
There are two types of memory presetting: automatic and
manual. Select whichever is preferred.
0 Power: “on” ( B= )
y> Press the “FM”, “MW” or “LW” button.
Set to the minimum frequency.
eFM: 87.50 MHz
¢ MW: 522 kHz
eLW: 155 kHz
4) Press. When the frequency
indication begins to change,
release.
5] Confirm the names (call signs, etc.) of the broadcasting
(The frequency will change stations which are preset to each channel, and enter them on
upward, and the automatic the file sheet.
presetting will begin with the Notes:
broadcasting station of the 1. In areas where there are less than 8 FM stations, the
lowest frequency and will remaining channels (through channel! 8) will be left
continue in order.) empty. The empty channels can be filled by using manual
memory presetting.
2. \If anew broadcasting station is preset into a channel, the
broadcasting station which was previously entered in
that channel will be automatically erased.