Technics RS-B11W

T A P E 2$T A P E I
PLAYBACK
.eco.0/p-ayback playback
Note:
When tape deck -and tape deck 2are both used for p!ayback at
the same time, the sound of tape deck 2will be heard.
Stop tape deck 2. ttierefore. If you want to tiear the playback
sound of tape decki.
$Press to “on” ($-$).
ΘPress to the “in” position (
$Press to release to the "oui position (i
using the Dolby noisereduction system.
0Insert the cassette.
Be sure the edge of the
cassette where the tape can be
s e e n f a c e s d o w n .
),
)for playback without
.Release(.
(Cfieck to be sure that the dubbIng/mixing indicator IS no longer
illuminated.)
)t o t h e off ” posi t i o n.
ΦAdjust the volume level
Use controls on the amplifier
c o n n e c t e d t o t h i s u n i t .
etc.
.Insert the cassette1
Be sure the edge of the
cassette wfiere the tape
c a n b e s e e n f a c e s d o w n .
T
Ỉ
]/
"/ "
\
$-/2) ************************* 3 ****************** 4@
5
6
■ỉ
В 78
'"
9
$ I
:;<
: - 1 : -(
İ İ
—rfirf.
/
9
Press to stop the
tape temporarily.
Press to stop the
tape temporarily.
ΤΛΡΕ1
Τ = ΡΕ
2
playbackrecord/playback
Press to stop.
Pr e s s t o s t op .
0Press.
(The playback will begin.)
0Press.
(The playback will begin.)
in
Headpfiones
(optional)
■Noise-reductlon system
This system functions to reduce the annoying ”hiss” noise in tapes,
this unit uses the Dolby Btype of noisereductlon system. When
the recording is made, the level of high-freguency signals is raised,
and then this level is lowered during playback, thus effectively
reducing high-freguency noise and expanding the dynamic range.
.Press to rewind the tape.
If it Is pressed during playback (“reviewing'' the tape)...
the tape will be rewound while the button is pressed, and will
resume playback when the button is release.
©Press to advance the tape.
If it is pressed during playback (“cueing” the tape)...
the tape will be fast forwarded while the button is pressed,
and will resume playback wtien the button is released.
$Dolby noise reduction system manufactured under license from
Dolby laboratories licensing Corporation.
'Dolby' and the double-D symbol are trademarks of Dolby tabora-
tories licensing Corporation.
Note:
Be sure to first reduce the volume level setting of the stereo
amplifier before cueing or reviewing the tape.
-6