Need help?Do you have a question about the Technics RS-BX747 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.8 cm/s |
| Dimensions | 430 x 125 x 300mm |
| Weight | 5.5 kg |
| Tape Type | Type I, Type II, Type IV |
| Frequency Response | 20 Hz - 20 kHz |
| Wow and Flutter | 0.07% |
| Output | 0.5V (Line) |
| Dolby | Dolby B, Dolby C |
| Heads | 3 (1 x recording, 1 x playback, 1 x erase) |
| Input | Line In |
Details of the cassette deck's mechanical and electrical specifications.
Steps to remove the main outer cabinet of the unit.
Instructions for detaching and removing the front panel assembly.
Procedure for writing optimal recording bias and equalization data to the EEPROM.
Method for adjusting the head azimuth for accurate sound reproduction.
Procedures for checking tape speed and adjusting playback gain levels.
Adjustments for AC bias, HX PRO, and erase current for optimal recording.
Steps to adjust overall gain and verify frequency response characteristics.
Flowchart for diagnosing issues with mechanism operation, including play, FF/REW.
Troubleshooting steps for microcomputer, solenoid control, and motor drive circuits.
Detailed pin functions, I/O divisions, and check points for the main microcomputer.
Cross-reference of component types with their terminal functions and part numbers.
To Next Page
