Need help?Do you have a question about the Technics RS-BX646 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Dimensions | 430 x 125 x 300mm |
| Heads | 1 x Record/Playback, 1 x Erase |
| Tape Type | Type I (Normal), Type II (CrO2), Type IV (Metal) |
| Frequency Response | 20 Hz to 20 kHz |
| Wow and Flutter | 0.07% WRMS |
| Output | Line Out |
| Inputs | Line In |
| Outputs | Line Out |
| Motor | Electronic Quartz Locked DC Motor |
Enables repeating a specific segment of the tape between designated start and end points.
Allows rewinding the tape to a pre-set 'memory stop' point for easy playback resumption.
Explains how to monitor the audio source or recorded tape during the recording process.
Guide to adjusting high-frequency sound characteristics during recording using the BIAS ADJUST control.
Guidance on cleaning the tape heads, pinch roller, and capstan shaft for optimal performance.
Recommendations for demagnetizing tape heads to prevent noise and maintain sound quality.
Instructions for cleaning the exterior surfaces of the unit using appropriate methods.
To Next Page
