Need help?Do you have a question about the Technics RS-AZ7 and is the answer not in the manual?
General| Tape Speed | 4.8 cm/s |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Heads | 1 x record/playback, 1 x erase |
| Weight | 5.5 kg |
| Type | Cassette Deck |
| Tape Type | Normal, CrO2, Metal |
| Noise Reduction | Dolby B, C |
| Frequency Response | 20Hz to 20kHz (Metal tape) |
| Input | Line In: 50mV |
| Output | Line out |
| Dimensions | 430 x 120 x 290 mm |
Buttons and switches for power, standby, and tape movement functions.
Step-by-step guide on how to play tapes and operate the deck.
Descriptions of AZ head, Dolby systems, and linear counter technology.
Steps to enter, perform, clear, and resume the self-diagnostic function.
Overview of procedures for replacing major device components.
Steps to write data to the EEPROM chip for optimal performance.
Procedures for head azimuth, tape speed, and MR head bias.
Diagnosing problems with OPEN/CLOSE and FF/REW operations.
Diagnosing issues with playback functionality and related components.
To Next Page
