To Next PageTo Next Page
Need help?Do you have a question about the Technics RS-M04 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Wow and Flutter | 0.07% WRMS |
| Inputs | Line In |
| Type | Cassette Deck |
| Heads | 1 x erase |
| Motor | DC Motor |
| Tape Type | CrO2, Metal |
| Output | Line Out |
| Dimensions | 430 x 300 x 100 mm |
| Outputs | Line Out, Headphone |
Detailed technical specifications for the cassette deck, including track system, speed, frequency response, and power.
Details on parts to remove and procedures for disassembly, referencing figures and screw types.
Detailed steps for installing the flywheel retainer, including specific part engagement.
Procedure for mounting the operation button assembly, ensuring correct lever alignment.
Precautions and steps for installing the main circuit board, ensuring button alignment.
Methods for adjusting tape speed and setting the tape selector based on tape type.
Steps for adjusting head position and azimuth for optimal playback quality.
Methods to measure and adjust tape speed accuracy and fluctuation with standard values.
Measuring the frequency response during playback using test tapes and equipment.
Measuring the audio output gain during playback with standard values.
Measuring the overall frequency response across different tape types (Normal, Fe-Cr, CrO2, Metal).
Adjusting bias current and erase current for optimal recording performance.
Adjusting the overall audio gain of the unit to specified levels.
Calibrating the fluorescent level meters for accurate signal indication.
Checking and verifying the Dolby Noise Reduction circuit's performance.
