To Next PageTo Next Page
Need help?Do you have a question about the Technics RS-B965 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Heads | 3 (Playback, Record, Erase) |
| Motor | DC Servo Motor |
| Tape Type | Normal, Chrome, Metal |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | 72dB (Dolby C, Metal Tape) |
| Wow and Flutter | 0.05% WRMS |
| Input | Line In |
| Output | Line Out, Headphones |
| Dimensions | 430 x 135 x 300 mm |
| Features | Dolby B/C |
| Motor Type | DC Motor |
| Inputs | Line In |
| Outputs | Line Out, Headphones |
Specs for deck system, heads, motors, tape speed, frequency response, S/N.
Procedures for cleaning and demagnetizing tape heads.
Standard setup for connecting amplifier and CD player.
Describes power, display, cassette holder, and core function buttons.
Controls for setting recording levels, balance, and calibration.
Utilizes APRS to automatically set optimal recording levels.
Step-by-step guide for achieving optimal recording.
Initial setup, checks, and detailed steps for level/bias calibration.
Steps to remove outer casing and front panel.
Procedures for removing internal circuit boards and chassis angles.
Steps for removing the main circuit board and mechanism assembly.
Details pin functions for the mechanical operation microcomputer.
Steps to set recording level balance between channels.
Steps to adjust bias for optimal frequency response.
Procedures for installing and aligning the playback/record head.
Common problems, causes, and check points.
