Technics RS-B765 - Page 12

RS-B755
Knobs 2. Remove the 6 screws (@~@).
3. Release the 2 claws.
1. Pull out the 4 knobs. 4. Remove the FL P.C.B. in the direction of the arrow.
Ref. No. Removal of the operation switch
P.C.B.
Removal of the rec level P.C.B.
Procedure
1-3—7-8
Rec Level PC.B.
1. Remove the 4 screws (@~®@).
2. Release the 4 claws.
1. Pull out the rec level knob.
2. Remove the 1 nut.
| Ref. No.
10
Procedure
1-3-4
Removal of the cassette holder
Damper Gear 1)
1. Remove the 1 screw (@). 4. Remove the cassette holder in the direction of the
2. Remove the damper gear. arrow ©.
| 3. Remove the rib in the direction of the arrow ®.
eee