Technics RS-BR465

HSIT9NI
>
Front
Panel
Controls
and
Functions
Stereo Cassette Deck RS-BR465
SsiandbyO2on
Aeject
oce
|
peak level meter(dB)
om on oe [olen
|—~—— right
"Rulo (wpe seiect Dolby NA Lid
Headroom Extension HX PRO
<j Autoreverse [>
Di boty ea a ra}
MPX fillet — noise reduction —
A Dotty NB—C
Quick Reverse/CD Synchro Edit
phones
i eer
Control Section
@) Power “standby () /on” switch
(power/H standby (!) = on)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the “standby” condition when this switch is
set to the standby (') position. Regardless of the switch
setting, the primary circuit is always “live” as long as the
power cord is connected to an eiectrica) outlet.
Eject button (4 eject)
This buttons is used to open the cassette holder.
Cassette holder
Display section
(See “Display Section” on page 6.)
© ©© ©
Recording-level control (rec level)
This control is used to regulate the recording level.
© Recording-balance control (balance)
This control is used to balance the left and right sound levels
during recording.
@ Microphone jacks (mic)
Bias-adjustment control (bias adjust)
The frequency response for each tape type can be equalized
by using this control.
@) Operation section -
(See “Operation Section” on page 5.)
(9) Headphones jack (phones)