Technics SA-EX110 Operating Instructions

|
|
QUARTZ LOCK. Č STEREO}
bat NANA dina FAT Pace abre n
ITA CUL
rte fit,
sanarosenoseod
Operation EN
MEMORY
MANUALAUTO
|
|
|
|
|
|
|
|
|
|
TETT sl ETT ETTER å ab ETER ATE nn — enton a.
; f
uM ————————^(^^^——— —— —————— rial
Preset tuning - | |
Presetting radio stations into the memory channels of this unit
makes selecting stations easy and simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new broadcast station is preset into a channel, the setting for the
broadcast station which was previously entered in that channel will
be automatically erased.
Automatic memory presetting
Automatic memory presetting allows this unit to automatically
search for broadcast stations and then preset them into memory.
With this method, the channels that can be preset into the memory
are set as follows for different bands (FM or AM).
When FM broadcast stations are preset,
For FM broadcast sEAHOTS. i o T rti ea irr eni pln redeas 1-30
When FM and AM broadcast stations are preset,
For FM broadcast stations oa sooo anneks 1-20
For AM broadcast stations eren catre er entres ud 1-30
Set to the frequency from which you want to start
automatic memory presetting. (See page 13.)
Press MEMORY until the frequency begins to
change.
(Automatic memory presetting will start.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls.
To stop, press MEMORY once again.
When a broadcast station is preset E
The memory indicator and the preset channel number will be
displayed for approximately ] second.
When presetting is completed
The last broadcast station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the
broadcast waves are too strong or too weak. In such cases, carry out
presetting manually. (See page 15)

Technics SA-EX110 Specifications

General

Brand	Technics
Model	SA-EX110
Category	Stereo Receiver
Language	English