Technics SA-EX110 Operating Instructions

A a bl nt — ES --
QUARTZ LOCK STEREO
AAA ANI RA? VAARRARBARARRAR=="EF"F=BAAAFARAARA=/—""0"0 LOMAS RARER zi LA LRARARAAA VARARARAMNI r RARAARARAR" LT AMMETTE ELA ALAZZA AAA ZA Lana na NA ANTA BRAS ORR! dd rada.
|
|
|
| Listening to radio broadcasts
— ——=: — — FEL M e Us c — O occ Án. POETA. vns EEE PAP nem (=. AA heme ETE —— mam. creano, e unco
Manual memory presetting FJ
The desired broadcast stations can be preset into the desired
channels by the user.
Set to the desired broadcast.
(See page 13.)
[f interference or static is keeping you from enjoying an FM
broadcast, press FM AUTO/MONO and change to monaural.
You can preset the memory in monaural just as in stereo.
Press MEMORY.
To cancel the memory function, press MEMORY again.
Press PRESET (V) or (^) to select the desired
channel.
Holding the buttons down lets you scroll through channels
faster.
Press MEMORY.
The channel will blink on the display.
To continue presetting
Repeat steps 1 through 4.
To listen to preset broadcast stations [E]
Press PRESET (V) or (^) to select the desired
channel. l
Holding the buttons down lets you scrolt through channels
faster.
To confirm the channel number of the broadcast station
being received
Press TUNER.
(The channel number will be displayed for approximately 1 second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference
Even if the power is switched to standby or the power cord is
disconnected from the household AC outlet, the memory will retain
its contents for approximately one month.
If frequency presettings are accidentally erased
Make the presettings once again.
The power cord should remain connected for one hour or more for
the memory back-up to be effective.
c
6
=
Q

Technics SA-EX110 Specifications

General

Brand	Technics
Model	SA-EX110
Category	Stereo Receiver
Language	English