Technics SA-EX110 Operating Instructions

TAPE MONITOR
° Operation E
| Making a recording |
Arre“ e e 27 I ee 12 o mm. LIE ob
Recording on the tape deck a
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.). ` |
See the tape deck's operating instructions for details.
Select the desired source to be recorded.
Press any button except | TAPE MONITOR | to select the
source you want to record from.
Begin recording.
Follow your tape deck's operating instructions.
Begin the desired source to be recorded.
To check the sound recorded while a recording is being
made E]
With a tape deck with 3 head system, it is possible to check the
sound recorded on the tape.
Press | TAPE MONITOR | on this unit and set the monitor but-
ton on the tape deck to “TAPE”.
Press | TAPE MONITOR | once again to turn it off.
Recording on the VCR
Before recording, prepare the VCR for recording (recording level
adjustment, input selector setting, etc.).
See the VCR's operating instructions for details.
Recording from an audio source
Select the audio source to be recorded.
Press either CD, TUNER or PHONO to select the source you
want to record from.
Recording from the tape deck is not possible.
Begin recording on the VCR
Follow your VCR’s operating instructions.
Begin the audio source to be recorded.

Technics SA-EX110 Specifications

General

Brand	Technics
Model	SA-EX110
Category	Stereo Receiver
Language	English