Technics SA-EX510

Before recording, prepare the tape deck for recording (recording
level adjustment, etc.).
See the tape deck’s operating instructions for details.
al; Select the desired source to be recorded.
Press any button except | TAPE MONITOR | to select the
source you want to record from.
Begin recording.
Follow your tape deck’s operating instructions.
Begin the desired source to be recorded.
To check the sound recorded while a recording is being
made £]
With a tape deck with 3 head system, it is possible to check the
sound recorded on the tape.
Press | TAPE MONITOR | on this unit and set the monitor but-
ton on the tape deck to “TAPE”.
Press | TAPE MONITOR | once again to turn it off.
Before recording, prepare the VCR for recording (recording level
adjustment, input selector setting, etc.).
See the VCR’s operating instructions for details.
Recording from an audio source
Select the audio source to be recorded.
Press either CD, TUNER or PHONO to select the source you
want to record from.
Recording from the tape deck is not possible.
Begin recording on the VCR
Follow your VCR’s operating instructions.
Begin the audio source to be recorded.
Recording from the TV or DVD player P)
If a TV or DVD player is connected to the “TV/DVD” terminals,
you can record off it.
Press TV/DVD (input select button).
Select the TV channel, or begin playback on DVD
player or laser disc player.
Begin recording on the VCR
Follow your VCR’s operating instructions.