Technics SA-GX505 User Manual

Set
the
center
frequency
level
(flashing
bar)
to
+10
dB.
The
illustration
shown
below
is
an
example
for
EQ1.
x
»
OMNISIs
P.EQ STONE ———
*PEQMODE
*MANUAL
+ 3
5 ry
*
1o'og 7
63
10
160
250
400
630
1k
16k
25k
4k
G3k
10k
125k
16k
poe h
= I E sitios
‘< FA
°o
eed
Select
the
preferred
slope,
“narrow”
or
“wide”.
The
curve
slope
selection
changes
from
“narrow”
to
‘wwide”
each
time
this
button
is
pressed.
The
illustration
shown
below
is
an
example
for
EQ1.
When “narrow” is selected:
ly,
=
OnnSiis
P.EQ/TONE————
*PEQMODE
*MANUAL
J ree
“th
Hz
y vo UE tag 7
tH)
40
63
100
160
250
400
630
1k
16k
25k
4k
Gk
10k
125k
16k
‘fr uot
When “wide” is selected:
"
ons
= =
P.EQ/TON!
*P£Q MODE
+
SIONS.
1
yap 1
(Hz)
40
63
100
160
250
400
630
tk
16k
25k
4k
Gk
10k
125k
16k
rr en oe
While
listening
to
the
sound
source,
select
the desired center frequency.
See
the
“Characteristics
of
center
frequency”
section
below
to
help
you
determine
the
desired
center
frequency.
To
select
the
center
frequency
more
precisely,
see
“Fine
adjustment
of
the
center
frequency”
below.
While
listening
to
the
sound
source,
read-
8
just
the
level
as
required.
=
OMNIS
P.EQ/TONE -omemem—
*PEQ MODE
“MANUAL
+
SHIMON LIS
y VE Dod /
40 63 100 160 250 400 630 1k 26k 25k 4k 63k 10k 15k 16k
é
‘oboe
é
Repeat
steps
4—8
to
adjust
the
center
fre-
quency
in
the
remaining
bands.
Caution:
Extreme
level
adjustments
in
any
frequency
band
may
cause
damage to your receiver and/or your speakers.
—23—
Fine adjustment of the center frequency
[FINE]
in step 7 above, press the fine mode select but-
ton to select the desired center frequency while
watching the parametric EQ system center fre-
quency display.
(The fine mode indicator will illuminate and you will notice that
the frequency spectrum now has more resolution.)
P,£Q TONE ————m—
*PEQ MODE
«MANUAL,
{7 ™=——-— Fine mode
indicator
10k 125k 16k
Parametric EQ
system center
frequency display
(
Characteristics
of
center
frequency
40 Hz~63 Hz
This is the deep bass sound range. When this level is increased,
the sound quality of a bass guitar, drums, etc. will be stabilized
for a full, rich sound. =
100 Hz~ 160 Hz
This is the bass sound range. When this level is increased, the
sound will seem to have a greater fullness and depth. Indistinct
sounds can, moreover, be made distinct by lowering the level.
250 Hz~ 400 Hz
This range is the fundamental sound range. When this level is in-
creased, a forceful “punch” is added. This level adjustment is
also used to add additional richness to male vocal sounds.
630 Hz~1 kHz
This is the range in which most of the vocal range of the human
voice is included. By increasing the control setting, vocal
reproductions become more full of life, and greater realism and
ambience can be added.
1.6 kHz~2.5 kHz
String instruments and wind instruments are in this range. When
this level is increased, their brilliance is emphasized for more
colorful sound.
4 kHz~6.3 kHz
This is the range for adjusting sound’s luster and brightness.
When this level is increased, an additional degree of brilliance
and color is added. For sounds which seem too metallic, on the
other hand, they can be softened by reducing the level.
10 kHz~ 16 kHz
This is the range in which finely subtle tones of radiance and
splendorous luminance can be added. By increasing the control
setting, an extra measure of glitter can be added, for example, to
the sounds of the cymbals, triangle, etc. This control can also be
used, by reducing its setting, to decrease annoying tape “hiss”
noises.

Technics SA-GX505 Specifications

General

Brand	Technics
Model	SA-GX505
Category	Stereo Receiver
Language	English