Technics SA-GX505 User Manual

[TAPE/DAT MONITOR]
Tape recording : : ee
To record on the tape deck or digital audio tape deck (DAT) con-
nected to the “TAPE/DAT” terminals. To check the sound recorded
Before recording, prepare the tape deck or DAT for recording
(recording level adjustment, etc.). With a tape deck with 3 heads, it is possible to check the sound
recorded on the tape.
1 Switch ON the power.
Press the tape-monitor switch and set the
monitor switch on the tape deck to “TAPE”
while recording.
Select the “A” and/or “B” speaker system(s) (The tape indicator will illuminate.)
to be used.
Check to be sure the tape indicator is not
illuminated.
If the tape indicator is illuminated, press this switch.
A Select the audio/video source for recording.
Begin recording.
Follow your tape deck’s or DAT’s operating instructions.
Begin the audio/video source to be record-
ed.
Adjust the volume level and the tone quality
as desired.
(Refer to page 14.)

Technics SA-GX505 Specifications

General

Brand	Technics
Model	SA-GX505
Category	Stereo Receiver
Language	English