Technics SC-CH700 - Page 19

Display section
@ Multi level display
This display shows the equalization/spectrum analysis level.
(0) SFP indicator ([sf^
This indicator illuminate to activate ambience enhancement.
® Voice mute indicator (VOICE MUTE)
This indicator illuminates to activate “karaoke" function.
@ Sound effect display
This display shows the mode of equalization curve or ambi¬
ence enhancement, or delay time, etc.
(0) Sampling frequency indicators
These indicators illuminate whenever a digital signal with one
of the sampling frequencies listed below is detected at
“DIGITAL” terminal on the rear panel of the sound processor.
32 kHz: For digital signals with the 32-kHz mode sampling
frequency.
(For example, DAT 32-kHz mode)
44.1 kHz: CD, DAT and others.
48 kHz: For digial signal with the 48-kHz mode sampling
frequency.
(For example, DAT 48-kHz mode)