Technics SC-CH700 User Manual

Listening to Radio
When broadcast frequencies have been preset to the memory, any
of those broadcast frequencies can thereafter be easily selected by
simply pressing one of the numeric buttons on the remote control or
using the preset tuning buttons on the CD player/tuner.
2 43
Tochnics
Broadcasts
You can memorize up to 30 radio stations into the unit's memory.
“Channels" 1 to 30 are available for the presetting of FM stations,
and “channels" 21 to 30 are available for MW stations, and “chan¬
nels” 29 to 30 are available for LW stations.
PRESET
/\
\/
Automatic memory presetting
Step 1 and 2 can be operated from the remote control. FoIIovk the
procedure below.
When this method is used, the frequencies of the selected broad¬
cast stations are automatically preset (in sequence from low to high
frequencies) in memory.
Have you switched ON the power?
1 Press the input seiect button marked
“TUNER” on the ampiifier.
2 Press the band select button to select the
desired band (FM/MW/LW).
Each time you press the band select button, the FM, MW and
LW indicators will be alternately displayed.
3 Press and hold one of the tuning buttons until
the display shows the lowest frequency.
1
2 3 4
S 9
7
9 9
10
11
12
13 14 IS
19
17
» / /\ .-v / /
/
; / /
19 20 21
22 23 24 / / / /_/
; '
—• LJ MHl
25
26
27
29 29 30 CH
1 _
Frequency
4 P ress and hold the preset memory button to
start the memory.
Keep the memory button depressed until the memory indi¬
cator starts flashing, then release the button.
After completing the memory presetting, the memory indicator
will go out and the display will show the last preset frequency.
■ To confirm the stations which are preset to
each channel
Press one of the preset tuning buttons.
PRESET
<:=
Preset channel being received The frequency preset
_1_^_
lL ilj lL lIj j
QUMnZLOCK
1 lij Li|>
10 11 12
13 14 1$
19 20 21
25 29 27
* ^ " L. L.-* i / /
22 23 24 /"" ■ i i J .r"/ ! J
29 29 30 arepiio
Preset channels of FM stations
Notes:
•A particular station may not have been memorized when using the
auto memory function for variety of reasons. Use the manual
memory functions to memorize stations not captured using auto
memory.
•When a new frequency is memorized in a channel, the frequency
previously memorized in that channel will be cancelled.
■ MW allocation
When the band select button is pressed for about 3 seconds in MW
band, MW frequency step will change to 10 kHz per step. If you
press and hold this button, it will be switched to 9 kHz per step and
vice versa.

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English