Technics SC-CH700 User Manual

♦ Edit-Recording from Compact Discs
(continued)
3 2
Fade-in edit recording
The unit makes a tape with no bianks between the tracks.
It is convenient to make an original dance-music tape.
A tape such as follows will be made:
Faded in at the start of the track
(Side A) I 113l track ^2na track ^^r(l IracK ^tth track |
(Side B) track track track | |
The remaining of the 4th track
1 Follow steps 1, 2 and 3 on page 45.
2 Press the fade-in edit button.
Illuminates
E S 53 E S 53
klj iJj l!j iSi
The cassette deck will rewind the tape and take up the leader
tape automatically and the “CD” edit indicator will illuminate.
The CCRT function (see page 42) will be automatically acti¬
vated.
When you want to record programmed tracks, program tracks
using the program play procedure (see page 30) before press¬
ing the fade-in edit button.
3 Press the play button.
The ATLS function (see page 51) will operate to adjust the
recording level and then recording will start.
When edit-recording has finished, the cassette deck automatically
enters the recording standby mode.
When the link indicator illuminates, it is possible to record another
disc for some more time on the tape using the fade-in editing (see
page 51). If another disc is not going to be recorded, press the stop
button on the CD player/tuner.
■ To cancel the fade-in edit recording
Press the stop button on the cassette deck.
The compact disc play will stop automatically.
■ If the “-E-” indication is displayed on the
cassette deck display
An will appear in tape counter if the cassette deck is not
ready to record because the safety tab has been broken off. Correct
the problem, and then repeat the procedure from step 2.
50

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English