11
RQT5744
Before use
Setting the time
This is a 24-hour clock.
The example shows how to set the clock for 16:25 (4:25 pm).
1 Press [8] to turn the unit on.
2
qq
Press [CLOCK/TIMER] to display
“CLOCK”.
Each time you press the button:
ww
Within 7 seconds
Press [SET].
3
qq
Press [TUNE/TIME ADJUST
(2 or 1)] to set the time.
ww
Press [SET].
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Reset the clock regularly.
Conserving power
The unit consumes 0.9 W even when it is turned off with [8].
To save power when the unit is not to be used for a long time,
unplug it from the household mains socket.
Remember to reset the radio stations and any other memory
items before using the unit again.
To Next Page
Loading...
Need help?
General
