Need help?Do you have a question about the Technics SE-9060 (X) and is the answer not in the manual?
General| Power Output | 110 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | DC to 100kHz |
| Damping Factor | 110 |
| Input Sensitivity | 1V |
| Signal-to-Noise Ratio | 115dB |
| Speaker load impedance | 4Ω to 16Ω |
| Dimensions | 450 x 173 x 375mm |
| Weight | 17.7kg |
| Type | Stereo power amplifier |
| Total Harmonic Distortion | 0.02% (20Hz-20kHz, 8Ω) |
Procedure for aligning the amplifier's key functions and settings.
Step-by-step guide for safely removing power transistors from the heat sink assembly.
To Next Page
